Renew, clean, fill pores and polish marble in one pass with Devo Marble Renewer on: treated/previously laid floors. Weathered, dull, dirty and scratched.

Purpose: to renew, clean, pore fill and polish marble all at once with Devo Marble Renewer on: treated/previously laid floors. Weathered, dull, dirty and scratched.

Application on:all calciferous natural stone floors such as: marble, travertine, bluestone, Solnhofer, white stone, Burgundy leidal, Jura, etc.

• If the floor was treated with a protective layer, remove it first with the appropriate Devo stripper! Paint and varnish: use Devo Varnish Strip. Acrylic polymers and polish: use Devo Polymstrip. Glue carpet and PVC residues: use Devo Gluestrip.
• If no pre-treatment is applicable, scrub the floor thoroughly.
• If unevenness (burrs, etc.), wet sand the floor with the Devoboy machine + drive plate + waterproof sanding discs. Sand with the fine grits 120, 220 and 400. Clean the floor with the Devo rinsing and vacuuming machine.
• By applying Devo Marble Renewer you do four operations in one go: remove cement residue, clean, fill pores and polish!

Procedure:

• Sprinkle the floor with water and sprinkle with Devo Marble Renewer powder. Maximum of 5 to 6 m² at one time. Then polish with the Devoboy machine + machine agitation + white pad. A yellowish cream is produced that should remain constant. Too dry: add a little water. Too wet: add powder. Polish overlapping for ± 20 to 25 minutes per 5 to 6 m². Once the water-resistant gloss has developed (to be checked with a floor squeegee), rinse thoroughly with water (Devo rinse and vacuum machine). When the surface is completely treated, mop the floor. After drying, machine polish with a dry white pad. The gloss depends on the lime content of your floor. To polish vertical areas, make Devo Marble Renewer cream in a jar. Then mix 2 parts powder with 1 part water. Apply the cream to the parts to be treated with sponge or brush. Polish with small thick white pad.
• In case of intensive use, it is recommended to immediately protect the floor additionally with Devo Gloss WITHOUT pre-cleaning with Devo Strongclean.

Periodic maintenance:

• Devo Dry Clean Set or Devo Marble Renewer for local treatment of dull spots.

Please also refer to Devo product labels, machine operating instructions and pay attention to safety instructions!