1L Sample 100 ml
Pure white Crème white Snow-white Clay Pepper grey Old grey Pearl grey Basalt grey Walnut Dark oak Mahogany Ebony River blue Caramel Forest green Aubergine Mustard Flamingo Canary Hortensia Mint Tangerine

Prices and stock only visible after sign in.
No account yet? Register here.


There are 44 variants of this article, view them here >

Plant-based colour stain for parquet and plank floors. Easy Colour is easy to apply and compatible with all DevoNatural finishing products.

DevoNatural Easy Colour is particularly recommended for easy and contemporary colouring of all types of parquet and plank floors, furniture, interior doors, etc. For indoor use only.

  • No deposits;
  • Easy to process;
  • Compatible with any DevoNatural product, both High Solid Oil, Wax and all DevoNatural varnishes;
  • Fast drying;
  • Extensive colour range;
  • Bio-based: plant-based product;
  • Penetrates well into the wood;
  • No washing away of colour pigment when using water-based varnishes;
  • Higher viscosity for easy application in industrial oil-rolling lines.

Surface preparation:

Treated or soiled wood: abrade, sand through and/or thoroughly clean if necessary to open the pores.

New or cleaned wood: sand flat and fine. In both cases, ensure a clean and grease-free surface.

Product preparation: shake well before use, also stir the product regularly during use.

Application: with brush, cotton cloth or rotary machine and thick white or beige pad. Apply sufficient product so that the wood is saturated. Immediately remove excess product with lint-free cotton cloths or buff with rotary machine and thick white or beige pad. For parquet floors, preferably apply with a varnish roller in strips of 60 to 80 cm. Immediately rub with a lint-free cotton cloth or polish with the rotary machine and thick white pad. Rub strips well together or polish with sufficient product. If necessary, polish the entire floor one more time with thick white pad, so that all excess product is removed very well! If desired, a second coat can be applied after 2 hours for a deeper colour effect. After drying, the treated surface can still be worked with water or wet product for a few hours, so any colour differences or marks can still be removed after drying! Avoid high temperatures or direct sunlight on the floor during application.

Drying time: 2 hours.

Finish: apply the 1st coat of DevoNatural finish after drying for 4 hours, without sanding.

Overflow: depending on the finish. See the corresponding DevoNatural product data sheet.

Application temperature: do not apply at temperatures below 12°C.

Consumption: 10 to 15 m² per litre.

Tool cleaning: with water.

Shelf life: 12 months in original, unopened packaging. Store frost-free.

Waste: consider unusable residues as chemical waste and dispose of in accordance with local authority regulations.

EU limit value for this product (cat.A/f): 150 g/l (2007)/130 g/l (2010). This product contains max. 3 g/l VOC.

Caution: stir well before use and check colour! Always do a colour test on the floor to be treated.
 Show more

Properties

  • 01450S86
  • DevoNatural
  • Sample 100 ml
  • Mint
Download productfiche
 
Filter 44 of 44 visible.
Product code Content Colour  
  © 2023 Devomat Industries NV

Legal information - Internet Privacy Policy

Webshop powered by Marcando