There are 7 variants of this article, view them here >
Acrylic joint sealant in spray pattern for sealing seams and joints on skirting boards, door thresholds, etc. Solvent- and silicone-free.
Moisture-resistant and compatible with all types of finishes, lacquers, oils and paints. Particularly suitable for filling joints in parquet floors, expansion joints, door thresholds, skirting boards, drawers, cupboards, wooden cover panels, etc. Easy to process, does not break, does not shrink, remains flexible.
- Easy to process;
- Easy to clean;
- Water-resistant;
- Does not break;
- No shrinkage;
- Compatible with all types of finishes;
- Fast drying;
- Good heat resistance;
- Good resistance to ageing.
Note: For highly moving floors such as floating parquet floors, it is best to use a bottom filler in the joint. This reduces the risk of the filling cracking, and gives the floor greater freedom of movement.
Substrate preparation: The substrate must be clean, dry, dust- and grease-free.
Product preparation: Cut the nozzle to the required thickness. Open the spray pattern by cutting off the cap.
Application: Apply the Devo Mastic filling well. Then even out the applied Devo Mastic with a moist cloth. Remove excess product with water.
Drying time: can be overpainted after 1 hour, depending on the ambient conditions (humidity and temperature).
Finish: can be finished with varnish, oil or wax, but does not absorb colour.
Processing temperature: 5 - 30 °C
Tool cleaning: uncured product: with moist cloth or Devo Wet Wipes. Cured product: mechanically with scouring pad or spatula.
Shelf life: at least 18 months in the original, well-sealed packaging. Storage temperature between 15 and 25°C Keep frost-free. Avoid extreme temperatures below 0°C and above 30°C.
Waste: residues and empty packaging
Properties
- 01440012
- Devo
- 300 ml
- Wenge
Name | Link |
---|---|
Devo Mastic TDS (NL).pdf | Devo Mastic TDS (NL).pdf ( - 176.6 KB) |
Devo Mastic TDS (FR).pdf | Devo Mastic TDS (FR).pdf ( - 252.8 KB) |