For loosening bonded carpet, dissolving and removing adhesives, carpet and PVC residues.

Devo Gluestrip is a ready-to-use liquid for dissolving and removing adhesives, carpet and PVC residues on wooden floors, screed/cement screeds, concrete, stone, tiles, etc.

• Effortlessly removes solid carpet and adhesive residues;
• Safe operation.

Technical note: May react with non-ferrous metals.

Also refer to the technical data sheet of Devo Gluestrip. The user must test before use and at his own risk whether the product is suitable for the floor in question!

Instructions for use

Surface preparation: if possible, remove carpet by cutting it into strips of approx. 50 cm and pulling them loose. Remove dust and dirt from the substrate.

Product preparation: the product is ready for use.

Application: preferably apply with a watering can. Apply evenly and generously. Allow the product to soak in for 20 minutes to 1 hour. Then remove the loosened paste with a floor scraper. For thicker layers of adhesive, repeat the treatment. Difficult-to-remove carpet can also be soaked with Devo Gluestrip to facilitate pulling off. Wear gloves. Wait until the floor is dry. Then remove any remaining residue with rotary machine and sanding pad P24 or P40.

Application temperature: 15 - 20°C

Consumption: 3 - 6 m²/L. Strongly depends on layer thickness to be removed, type of material and substrate.

Tool cleaning: with water.

Shelf life: unlimited in original closed packaging. Store frost-free.