Devo Dustmaster DM 5250 basic machine
230500
Fine dust source extraction at the highest level!
The three 2-stage bypass motors ensure an impressive underpressure of 24 kPa, and that at an air flow rate of 5250 l/min !!!
No complex electronics to fail and no shaking systems to clean the filters. Due to its ingenious but simple design, maintenance-sensitive parts were omitted.
Dust bag almost full? Just look through the transparent lid!
Absolutely no fine dust gets through the HEPA cartridge exhaust filter!
In the development of Devo machines, particular attention is paid to reducing fine dust emissions to the absolute minimum. This becomes a particular problem when there are simultaneously high expectations of maximum air flow, which in turn is necessary to ensure proper source extraction for machines such as Devo Belt MC/HP 200 or Devo Master 3D.
Devo Clean-air Technology: optimal filtration in 4 steps!
- 1st filter passage: disposable or reusable filter bag
- 2nd filter is a 470 g/m² polyester fine dust filter bag
- 3rd filter is a carbon filter bag, which filters the very finest dust from the extracted air
- 4th filter is a class L35500 hepa filter which is located on the outlet and guarantees that absolutely no fine dust gets back into the expelled air.
This very fine and careful filtering, combined with an unmatchable air flow rate, guarantees dust-free work as you do not know it today. Even when 2 machines are connected!
Thanks to its comptact design, the Devo Dustmaster DM5 250 takes up little space, and therefore fits even in a smaller van.
Technical data:
- Power supply: standard plug 230 V
- Power: 3 motors 2-stage 3000/3500 Watt max
- Filter class: L 35500 cm²
- Negative pressure: 24 kPa
- (actual) Air flow rate: 5250 l/min or 315 m³/h
- Boiler capacity: 100 l painted steel
- Cable: 10 m
- Boiler input: 2 x Ø 50 mm
- Dimensions: 57x63x115 H
- Weight: 55 kg
- Warranty: 2 years.
Properties
- 230500
- Devo