01 July 2021

Removal of adhesive, carpet and PVC residues with Devo Gluestrip

Read more about removing adhesive, carpet and PVC residue with Devo Gluestrip here.

Purpose: removal of adhesive, carpet and PVC residues with Devo Gluestrip.

Application on: all stone floors to be restored to their original state.

  • For manual stripping:cut the floor covering with a straight-edge Stanley knife into strips of ± 50 cm.
  • For machine stripping with the Devo stripping machine:cut the floor covering into strips of ± 30 cm.
  • Then pour Devo Gluestrip on the remaining residue + adhesive. Allow the product to take effect for 20 minutes to 1 hour. Then remove the loosened paste with a scraper.
  • If necessary, remove the last residues with the Devoboy machine + drive plate + thick black pad 
  • Hard residues wet sanding with the Devo waterproof sanding discs. Porous floors are sanded from grit 80 to 120, 220, 400.
  • Other floors are worked with the fine grit only, 120, 220, 400.
  • Then clean the floor with the Devo rinse and vacuum machine.
  • If necessary, degrease and scrub the floor with the Devoboy machine + white-green brush + Devo Strongclean.
  • For application of Devo finishing products, see the corresponding work schedules.

Please also refer to Devo product labels, machine operating instructions and pay attention to safety instructions!

Devo Gluestrip 2,5 L

Strippers -

014012
Devo Strongclean

Cleaners -

024100
2 Variants
Devo thick black pad

Sanding, polishing and other pads -

32104000
2 Variants

Webshop powered by Marcando