01 July 2021

Renew, clean, pore fill and polish marble in one pass with Devo Marble Renewer on: untreated/newly laid floors. Not scratched.

Learn more about marble renewal, cleaning, pore filling and polishing all at once with Devo Marble Renewer on: untreated/newly laid floors. Not scratched.

Purpose: to renew marble, clean, fill pores and polish in one pass with Devo Marble Renewer on: untreated/newly laid floors. Not scratched.

Application on:all calciferous natural stone floors such as: marble, travertine, bluestone, Solnhofer, white stone, Burgundy leidal, Jura, etc..

  • Saturate the surface to be treated with water and wash away all dirt. Remaining sand grains can cause scratches during the treatment!
  • If unevenness (burrs, etc.) saturate the floor with water again! Then wet sand the floor with the Devoboy machine + waterproof sanding discs. Sand with fine grains 120, 220 and 400. Clean the floor with the Devo rinsing and vacuuming machine.
  • By applying Devo Marble Renewer you do four operations in one go: remove cement residue, clean, fill pores and polish!

Procedure:

  • Sprinkle the floor with water and sprinkle with Devo Marble Renewer powder. Maximum of 5 to 6 m² at one time. Then polish with the Devoboy machine + machine agitation + white pad. A yellowish cream is produced that should remain constant. Too dry: add a little water. Too wet: add powder. Per 5 to 6 m² ± 20 to 25 minutes of overlapping polishing. After the water-resistant gloss has developed (to be checked with a floor squeegee), rinse thoroughly with water (Devo rinse-  and suction machine). When the surface is completely treated, mop the floor. After drying, machine polish with a dry white pad. The gloss depends on the lime content of your floor. For polishing smaller areas and vertical sections, make Devo Marble Renewer cream in a jar. Then mix 2 parts powder with 1 part water. Apply the cream to the areas to be treated with sponge or brush. Polish with small thick white pad.
  • In case of intensive use, it is recommended to immediately protect the floor additionally with Devo Gloss WITHOUT pre-cleaning with Devo Strongclean.

Periodic maintenance:

  • Devo Dry Clean Set
  • Devo Marble Renewer for local treatment of dull spots.

Please also refer to the Devo products' labels, machine operating instructions and pay attention to safety regulations!

Devo Marble Renewer

Finishing and protection products -

024250
2 Variants
Devo Gloss

Finishing and protection products -

024240
2 Variants
Devo thick white pad

Sanding, polishing and other pads -

32102016
Devo Machine Weight 12,5 kg

Accessories for Woodboy machines -

320032

Webshop powered by Marcando